CHIN CHIN HIBACHI EXPRESS

Inspection item: Inspection item 11A

Code .04(6)(e)

Observed wings in deep covered container that did not properly cool. Foods shall be cooled using one or more methods approved by the health authority (e.g., smaller batches, thinner portions, using rapid cooling equipment, stirring food in containers placed in an ice water bath, using containers that facilitate heat transfer and ice as an ingredient; placing items in the walk-in cooler or walk-in freezer partially or completely uncovered as long as the food is protected from overhead contamination). (Pf, C) Corrective Actions: wings discarded. reviewed cooling methods with person in charge

Inspection item: Inspection item 14A

Code .04(4)(k)

Observed in use utensils stored in stagnant water below 135. During pauses in food preparation or dispensing, food preparation and dispensing utensils shall be stored: 1. in the food with their handles above the top of the food and the container; 2. In food that is not time / temperature control for safety food with their handles above the top of the food within containers or equipment that can be closed; 3. On a clean portion of the food preparation table or cooking equipment only if the in-use utensil and the food-contact surface of the food preparation table or cooking equipment are cleaned and sanitized at a frequency; 4. in running water of sufficient velocity to flush particulates to the drain, if used with moist food such as ice cream or mashed potatoes; 5. in a clean, dry container; or 6. in a container of water if the water is maintained at a temperature of at least 135°F (57°C) and the container is cleaned at the required frequency. (C) Corrective Actions: water discarded, new utensils obtained.

Inspection item: Inspection item 15A

Code .05(1)(a)

Observed cold hold unit with an ambient air temperature greater than 41 Utensils and food-contact surfaces of equipment shall be made of materials that do not allow the migration of deleterious substances or impart colors, odors, or tastes to food and under normal use conditions, and shall be: (P) safe (P), durable, corrosion-resistant, and nonabsorbent. In addition, materials shall be sufficient in weight and thickness to withstand repeated warewashing and shall be finished to have a smooth, easily cleanable surface. Materials shall be resistant to pitting, chipping, crazing, scratching, scoring, distortion and decomposition. (C)