Taqueria La Luz

2 findings recorded on Oct 21, 2026. 1 marked corrected on site.

1. Violation recordedItem 6-1A ↗

   Cold holding

   Observed multiple items held in reach in and prep top coolers temping above 41F. Except during preparation, cooking, or cooling, or when time is used as the public health control, time/temperature control for safety food shall be maintained at 41°F (5°C) or below or 135°F (57°C) or above, except that roasts cooked to a temperature and for a time specified in subsection (5)(a)2 of this Rule and reheated using the same temperature and time conditions as cooking may be held at a temperature of 130°F (54°C) or above.

   Inspector’s full note

   Inspection item: Proper cold holding temperatures

   Code 511-6-1.04(6)(f)

   Observed multiple items held in reach in and prep top coolers temping above 41F. Except during preparation, cooking, or cooling, or when time is used as the public health control, time/temperature control for safety food shall be maintained at 41°F (5°C) or below or 135°F (57°C) or above, except that roasts cooked to a temperature and for a time specified in subsection (5)(a)2 of this Rule and reheated using the same temperature and time conditions as cooking may be held at a temperature of 130°F (54°C) or above. COS Advised PIC to discard items. Corrected On-Site. New Violation.

   Official report · Item 6-1A ↗

   Marked corrected on site

2. Violation recordedItem 15B ↗

   Warewashing facilities and test strips

   Observed no chlorine test strips for measuring chlorine concentration. CA: Advised PIC to obtain test strips.

   Inspector’s full note

   Inspection item: Warewashing facilities: installed, maintained, used; test strips

   Code 511-6-1.05(3)(h),(i),(j)

   Observed no chlorine test strips for measuring chlorine concentration. CA: Advised PIC to obtain test strips. 511-6-1.05(3)(h),(i),(j) - Temperature Measuring Device, Manual Warewashing; Sanitizing Solutions, Testing Device (Pf) (h) Temperature Measuring Devices, Manual and Mechanical Warewashing. 1. In manual warewashing operations, a temperature measuring device shall be provided and readily accessible for frequently measuring the washing and sanitizing temperatures. Pf 2. In hot water mechanical warewashing operations, an irreversible registering temperature indicator shall be provided and readily accessible for measuring the utensil surface temperature. Pf (i) Sanitizing Solutions, Testing Devices. A test kit or other device that accurately measures the concentration in mg/L of sanitizing solutions shall be provided. Pf j) Cleaning Agents and Sanitizers. 1. Cleaning agents that are used to clean equipment and utensils as specified under section (7) of this Rule, shall be provided and available for use during all hours of operation. Pf 2. Except for those that are generated on-site at the time of use, chemical sanitizers that are used to sanitize equipment and utensils, as specified under Section (8) of this Rule, shall be provided and available for use during all hours of operation. Pf New Violation. Correct By: 10/31/2026

   Official report · Item 15B ↗

   Correction status not recorded

   Correct by Oct 31, 2026

Correction status comes from the dated report. Later changes may not be recorded here.