Historic Roswell Place, Assisted Living & Memory Care scores 72; inspectors cite handwashing issues

1. 01

   Handwashing

   Item 2-2D ↗

   Observed hand sink in main kitchen was blocked with food cooling cart. Observed hand sink in the pilot kitchen has utensils placed in it.

   Inspector’s full note +

   Code 511-6-1.06(2)(o)

   Observed hand sink in main kitchen was blocked with food cooling cart. Observed hand sink in the pilot kitchen has utensils placed in it. PIC removed the things from the hand sink. 511-6-1.06(2)(o) - Using a Handwashing Sink- Operation & maintenance (Pf) (o) Using a Handwashing Sink. 1. A handwashing sink shall be maintained so that it is accessible at all times for employee use. Pf 2. A handwashing facility may not be used for purposes other than handwashing. Pf 3. An automatic handwashing facility shall be used in accordance with manufacturer’s instructions. Pf Corrected On-Site. Repeat Violation.

   Official report · Item 2-2D ↗
   Corrected on siteRepeat violation
2. 02

   Food condition

   Item 3-1C ↗

   Observed several boxes of strawberries with mold like fuzzy substance on them. PIC discarded the boxes.

   Inspector’s full note +

   Code 511-6-1.04(1)

   Observed several boxes of strawberries with mold like fuzzy substance on them. PIC discarded the boxes. 511-6-1.04(1) - Safe, unadulterated and Honestly Presented (P) (1) Condition. Food shall be safe, unadulterated, and honestly presented. P Corrected On-Site. Repeat Violation.

   Official report · Item 3-1C ↗
   Corrected on siteRepeat violation
3. 03

   Food-contact surface sanitation

   Item 4-2B ↗

   Observed ice machine had a dark mold like buildup inside in the pilot kitchen and ice machine in the main kitchen has red slimy mold like buildup inside.PIC advised to make a cleaning schedule and have all the food contact surfaces cleaned to sight and touch. 511-6-1.05(7)(a)1 - Equipment, Food-Contact Surfaces,& Utensils (Pf) (7) Cleaning of Equipment and Utensils.

   Inspector’s full note +

   Code 511-6-1.05(7)(a)1

   Observed ice machine had a dark mold like buildup inside in the pilot kitchen and ice machine in the main kitchen has red slimy mold like buildup inside.PIC advised to make a cleaning schedule and have all the food contact surfaces cleaned to sight and touch. 511-6-1.05(7)(a)1 - Equipment, Food-Contact Surfaces,& Utensils (Pf) (7) Cleaning of Equipment and Utensils. (a) Equipment, Food-Contact Surfaces, and Utensils. 1. Equipment food-contact surfaces and utensils shall be clean to sight and touch. Pf. Repeat Violation. Correct By: 10/08/2026

   Official report · Item 4-2B ↗
   Repeat violation

   Correct by
   Oct 8, 2026

4. 04

   Food-contact surface sanitation

   Item 4-2B ↗

   Observed dishwasher in the pilot kitchen is not reaching the required 180F temperature. PIC advised to fix the dishwasher and use the main kitchen washer until it is fixed.

   Inspector’s full note +

   Code 511-6-1.05(6)(l)

   Observed dishwasher in the pilot kitchen is not reaching the required 180F temperature. PIC advised to fix the dishwasher and use the main kitchen washer until it is fixed. 511-6-1.05(6)(l) - Mechanical Warewashing, Hot Water Sanitization Temperatures(P) (l) Mechanical Warewashing Equipment, Hot Water Sanitization Temperatures. 1. Except as specified in paragraph 2 of this subsection, in a mechanical operation, the temperature of the fresh hot water sanitizing rinse as it enters the manifold may not be more than 194ºF (90ºC), or less than: Pf (i) For a stationary rack, single temperature machine, 165ºF (74ºC); Pf or (ii) For all other machines, 180ºF (82ºC). Pf 2. The maximum temperatures specified under paragraph 1 of this subsection, do not apply to the high pressure and temperature systems with wand-type, hand-held, spraying devices used for the in-place cleaning and sanitizing of equipment such as meat saws Corrected On-Site. New Violation.

   Official report · Item 4-2B ↗
   Corrected on siteNew violation
5. 05

   Date marking and disposition

   Item 6-2 ↗

   Observed several ready to eat foods are without use by date and pudding in the WIC is stored beyond expiration date. PIC discarded the food.

   Inspector’s full note +

   Code 511-6-1.04(6)(g)

   Observed several ready to eat foods are without use by date and pudding in the WIC is stored beyond expiration date. PIC discarded the food. 511-6-1.04(6)(g) - Ready-To-Eat Time/Temperature Control for Safety Food, Date Marking (Pf) (g) Ready-to-Eat Time/Temperature Control for Safety Food, Date Marking 1. Except when packaging food using a reduced oxygen packaging method, and except as specified in paragraphs 5 and 6 of this subsection, refrigerated, ready-to-eat, time/temperature control for safety food prepared and held in a food establishment for more than 24 hours shall be clearly marked to indicate the date or day by which the food shall be consumed on the premises, sold, or discarded, when held at a temperature of 41°F (5°C) or below for a maximum of 7 days. The day of preparation shall be counted as Day 1. Pf 2. Except as specified in paragraphs 5 through 7 of this subsection, refrigerated, ready-to-eat, time/temperature control for safety food prepared and packaged by a food processing plant shall be clearly marked, at the time the original container is opened in a food service establishment and if the food is held for more than 24 hours, to indicate the date or day by which the food shall be consumed on the premises, sold, or discarded, when held at a temperature of 41°F (5°C) or below for a maximum of 7 days after the original container is opened. The day the original container is opened in the food service establishment shall be counted as Day 1, except, the day or date marked by the food service establishment may not exceed a manufacturer’s use by date if the manufacturer determined the use-by date based on food safety; Pf 3. A refrigerated, ready-to-eat, time/temperature control for safety food ingredient or a portion of a refrigerated, ready-to-eat, time/temperature control for safety food that is subsequently combined with additional ingredients or portions of food shall retain the date marking of the earliest-prepared or first-prepared ingredient. Pf 4. A date marking system that meets the criteria stated in paragraphs 1 and 2 of this subsection may include: (i) Using a method approved by the Health Authority for refrigerated, ready-to-eat time / temperature control for safety food that is frequently rewrapped, such as lunchmeat or a roast, or for which date marking is impractical, such as soft serve mix or milk in a dispensing machine; (ii) Marking the date or day of preparation, with a procedure to discard the food on or before the last date or day by which the food must be consumed on the premises, sold, or discarded; (iii) Marking the date or day the original container is opened in a food service establishment, with a procedure to discard the food on or before the last date or day by which the food must be consumed on the premises, sold, or discarded; or (iv) Using calendar dates, days of the week, color-coded marks, or other effective marking methods, provided that the marking system is disclosed to the Health Authority upon request. 5. The requirements in paragraphs 1 and 2 of this subsection do not apply to individual meal portions served or repackaged for sale from a bulk container upon a consumer’s request. 6. The requirements in paragraphs 1 and 2 of this subsection do not apply to shellstock. 7. The requirement in paragraph 2 of this subsection does not apply to the following foods prepared and packaged by a food processing plant inspected by a Health Authority: (i) Deli salads, such as ham salad, seafood salad, chicken salad, egg salad, pasta salad, potato salad, and macaroni salad, manufactured in accordance with 21 CFR 117 Current good manufacturing practice in manufacturing, packing, or holding human food; (ii) Hard cheeses containing not more than 39% moisture as defined in 21 CFR 133 Cheeses and related cheese products, such as cheddar, gruyere, parmesan and reggiano, and romano; (iii) Semi-soft cheeses containing more than 39% moisture, but not more than 50% moisture, as defined in 21 CFR 133 Cheeses and related cheese products, such as blue, edam, gorgonzola, gouda, and monterey jack; (iv) Cultured dairy products as defined in 21 CFR 131 Milk and cream, such as yogurt, sour cream, and buttermilk; (v) Preserved fish products, such as pickled herring and dried or salted cod, and other acidified fish products defined in 21 CFR 114 Acidified foods; (vi) Shelf stable, dry fermented sausages, such as pepperoni and Genoa salami; and (vii) Shelf stable salt-cured products, such as prosciutto and Parma ham. Corrected On-Site. New Violation.

   Official report · Item 6-2 ↗
   Corrected on siteNew violation
6. 06

   Required permits and notices

   Item 13A ↗

   Observed current inspection report was not posted on site at the time of inspection. 511-6-1.02(1)(d) - Displaying of the Inspection Report (C) 1.

   Inspector’s full note +

   Code 511-6-1.02(1)(d)

   Observed current inspection report was not posted on site at the time of inspection. 511-6-1.02(1)(d) - Displaying of the Inspection Report (C) 1. The most current inspection report shall be prominently displayed in public view at all times, within fifteen feet of the front or primary public door and between five feet and seven feet from the floor and in an area where it can be read at a distance of one foot away. 2. Food service establishments with drive-thru windows will post the current inspection report, and also have the inspection report posted so that a minimum of the top one-third of a copy of the current inspection report is visible through each window allowing customers to easily read the score, date of inspection and establishment information. 3. At food service establishments with no primary or public door, the current inspection report shall be prominently displayed at all times where the documents can be read by the public from a distance of one foot away. If requirements of this paragraph are not possible because of physical restrictions, a location will be determined as approved by the Health Authority. 4. The most current inspection report for mobile food service units and extended food service units issued by the local Health Authority having jurisdiction for its inspections shall be prominently displayed in public view during all hours of operation. Such inspection reports shall be prominently displayed at the point of service where the documents can be read by the public from a distance of one foot away. 5. A food service establishment inspection report addendum need not be displayed, but shall be made available by the food service establishment to the public upon request. New Violation. Correct By: 10/07/2026

   Official report · Item 13A ↗
   New violation

   Correct by
   Oct 7, 2026

Correction and repeat labels quote the report. An absent label leaves correction status unknown; a deadline does not confirm a correction.