EL CARRETON #2

4 findings recorded on Oct 14, 2026. 1 marked corrected on site.

1. Violation recordedItem 15A ↗

   Equipment design and condition

   Observed gaskets on both cooler drawers under the grill to be in disrepair. Equipment components such as doors, seals, hinges, fasteners, and kick plates shall be kept intact, tight, and adjusted in accordance with manufacturer's specifications.

   Inspector’s full note

   Inspection item: Food and nonfood-contact surfaces cleanable, properly designed, constructed, and used

   Code 511-6-1.05(6)(a)

   Observed gaskets on both cooler drawers under the grill to be in disrepair. Equipment components such as doors, seals, hinges, fasteners, and kick plates shall be kept intact, tight, and adjusted in accordance with manufacturer's specifications. CA: PIC to replace or repair gaskets as needed. New Violation. Correct By: 10/24/2026

   Official report · Item 15A ↗

   Correction status not recorded

   Correct by Oct 24, 2026

2. Violation recordedItem 15C ↗

   Equipment cleanliness

   Observed fan covers on condenser unit in WIC to have accumulation of dust. Nonfood-contact surfaces of equipment shall be cleaned at a frequency necessary to preclude accumulation of soil residues.

   Inspector’s full note

   Inspection item: Nonfood-contact surfaces clean

   Code 511-6-1.05(7)(d)

   Observed fan covers on condenser unit in WIC to have accumulation of dust. Nonfood-contact surfaces of equipment shall be cleaned at a frequency necessary to preclude accumulation of soil residues. CA: PIC to ensure fan covers are cleaned at a frequency that prevents heavy accumulation. New Violation. Correct By: 10/24/2026

   Official report · Item 15C ↗

   Correction status not recorded

   Correct by Oct 24, 2026

3. Violation recordedItem 16B ↗

   Plumbing and drainage

   Observed backflow device on mop sink to be leaking while operating. A backflow or backsiphonage prevention device installed on a water supply system shall meet American Society of Sanitary Engineering (A.S.S.E.) standards for construction, installation, maintenance, inspection, and testing for that specific application and type of device.

   Inspector’s full note

   Inspection item: Plumbing installed; proper backflow devices

   Code 511-6-1.06(2)(e)

   Observed backflow device on mop sink to be leaking while operating. A backflow or backsiphonage prevention device installed on a water supply system shall meet American Society of Sanitary Engineering (A.S.S.E.) standards for construction, installation, maintenance, inspection, and testing for that specific application and type of device. CA: PIC to contact appropriate personnel to service backflow device on mop sink. New Violation. Correct By: 10/17/2026

   Official report · Item 16B ↗

   Correction status not recorded

   Correct by Oct 17, 2026

Correction status comes from the dated report. Later changes may not be recorded here.