Atlanta · Health score & inspection history
Get Fruity Cafe
2740 GREENBRIAR PARKWAY ATLANTA, GA 30331
Get Fruity Cafe in Atlanta scored 85/100 (grade B) at its Nov 10, 2026 Fulton County inspection.
Latest available inspection
Fulton CountyWhat the inspector found
All 5 findings ↗5 findings recorded on Nov 10, 2026.
Violation recordedItem 4-2B ↗
Food-contact surface sanitation
Observed inside of ice machine with black substance build up. Ca: 511-6-1.05(7)(a)1 - Equipment, Food-Contact Surfaces,& Utensils (Pf) (7) Cleaning of Equipment and Utensils.
Inspector’s full note
Inspection item: Food-contact surfaces: cleaned & sanitized
Code 511-6-1.05(7)(a)1
Observed inside of ice machine with black substance build up. Ca: 511-6-1.05(7)(a)1 - Equipment, Food-Contact Surfaces,& Utensils (Pf) (7) Cleaning of Equipment and Utensils. (a) Equipment, Food-Contact Surfaces, and Utensils. 1. Equipment food-contact surfaces and utensils shall be clean to sight and touch New Violation. Correct By: 11/13/2026
Official report · Item 4-2B ↗Correction status not recorded
Correct by
Violation recordedItem 6-2 ↗
Date marking and disposition
Observed food items without proper date marking labels. CA: Advised PIC to date mark TCS Food that is being held for more than 24 hours.
Inspector’s full note
Inspection item: Proper date marking and disposition
Code 511-6-1.04(6)(g)
Observed food items without proper date marking labels. CA: Advised PIC to date mark TCS Food that is being held for more than 24 hours. 511-6-1.04(6)(g) - Ready-To-Eat Time/Temperature Control for Safety Food, Date Marking (Pf) (g) Ready-to-Eat Time/Temperature Control for Safety Food, Date Marking. Observed several TCS Foods held in RIC for more than 24 hours without any date marking. CA: Advised PIC to date mark TCS food when it’s being held for more than 24 hours. 511-6-1.04(6)(g) - Ready-To-Eat Time/Temperature Control for Safety Food, Date Marking (Pf) (g) Ready-to-Eat Time/Temperature Control for Safety Food, Date Marking 1. Except when packaging food using a reduced oxygen packaging method, and except as specified in paragraphs 4 and 5 of this subsection, refrigerated, ready-to-eat, time/temperature control for safety food prepared and held in a food establishment for more than 24 hours shall be clearly marked to indicate the date or day by which the food shall be consumed on the premises, sold, or discarded, when held at a temperature of 41°F (5°C) or below for a maximum of 7 days. The day of preparation shall be counted as Day 1. Pf 2. Except as specified in paragraphs 4 through 6 of this subsection, refrigerated, ready-to-eat, time/temperature control for safety food prepared and packaged by a food processing plant shall be clearly marked, at the time the original container is opened in a food service establishment and if the food is held for more than 24 hours, to indicate the date or day by which the food shall be consumed on the premises, sold, or discarded, when held at a temperature of 41°F (5°C) or below for a maximum of 7 days after the original container is opened. The day the original container is opened in the food service establishment shall be counted as Day 1, except, the day or date marked by the food service establishment may not exceed a manufacturer’s use by date if the manufacturer determined the use-by date based on food safety; Pf 3. A refrigerated, ready-to-eat, time/temperature control for safety food ingredient or a portion of a refrigerated, ready-to-eat, time/temperature control for safety food that is subsequently combined with additional ingredients or portions of food shall retain the date marking of the earliest-prepared or first-prepared ingredient. Pf 4. A date marking system that meets the criteria stated in paragraphs 1 and 2 of this subsection may include: (i) Using a method approved by the Health Authority for refrigerated, ready-to-eat time / temperature control for safety food that is frequently rewrapped, such as lunchmeat or a roast, or for which date marking is impractical, such as soft serve mix or milk in a dispensing machine; (ii) Marking the date or day of preparation, with a procedure to discard the food on or before the last date or day by which the food must be consumed on the premises, sold, or discarded; (iii) Marking the date or day the original container is opened in a food service establishment, with a procedure to discard the food on or before the last date or day by which the food must be consumed on the premises, sold, or discarded; or (iv) Using calendar dates, days of the week, color-coded marks, or other effective marking methods, provided that the marking system is disclosed to the Health Authority upon request. 5. The requirements in paragraphs 1 and 2 of this subsection do not apply to individual meal portions served or repackaged for sale from a bulk container upon a consumer’s request. 6. The requirements in paragraphs 1 and 2 of this subsection do not apply to shellstock. 7. The requirement in paragraph 2 of this subsection does not apply to the following foods prepared and packaged by a food processing plant inspected by a Health Authority: (i) Deli salads, such as ham salad, seafood salad, chicken salad, egg salad, pasta salad, potato salad, and macaroni salad, manufactured in accordance with 21 CFR 110 Current good manufacturing practice in manufacturing, packing, or holding human food; (ii) Hard cheeses containing not more than 39% moisture as defined in 21 CFR 133 Cheeses and related cheese products, such as cheddar, gruyere, parmesan and reggiano, and romano; (iii) Semi-soft cheeses containing more than 39% moisture, but not more than 50% moisture, as defined in 21 CFR 133 Cheeses and related cheese products, such as blue, edam, gorgonzola, gouda, and monterey jack; (iv) Cultured dairy products as defined in 21 CFR 131 Milk and cream, such as yogurt, sour cream, and buttermilk; (v) Preserved fish products, such as pickled herring and dried or salted cod, and other acidified fish products defined in 21 CFR 114 Acidified foods; (vi) Shelf stable, dry fermented sausages, such as pepperoni and Genoa salami; and (vii) Shelf stable salt-cured products, such as prosciutto and Parma ham. New Violation. Correct By: 11/13/2026
Official report · Item 6-2 ↗Correction status not recorded
Correct by
Violation recordedItem 10D ↗
Food labeling and containers
Observed squeeze bottles of sauces without proper label. CA: all items removed from original container must be labeled with common English name.
Inspector’s full note
Inspection item: Food properly labeled; original container
Code 511-6-1.04(4)(d)
Observed squeeze bottles of sauces without proper label. CA: all items removed from original container must be labeled with common English name. 511-6-1.04(4)(d) - Food Storage Containers Identified with Common Name of Food (C) (d) Food Storage Containers, Identified with Common Name of Food. Except for containers holding food that can be readily and unmistakably recognized, such as dry pasta, working containers holding food or food ingredients that are removed from their original packages for use in the food establishment, such as cooking oils, flour, herbs, potato flakes, salt, spices, and sugar shall be clearly and legibly identified, in English, with the common name of the food. New Violation. Correct By: 11/15/2026
Official report · Item 10D ↗Correction status not recorded
Correct by
Read 2 more findings
Violation recordedItem 11D ↗
Thermometers
Observed no hanging thermometers in RIC. Ca: 511-6-1.05(2)(x) - TMD, Located in Refrigerators/ Hot Holding (Pf, C) (x) Temperature Measuring Devices.
Inspector’s full note
Inspection item: Thermometers provided and accurate
Code 511-6-1.05(2)(x)
Observed no hanging thermometers in RIC. Ca: 511-6-1.05(2)(x) - TMD, Located in Refrigerators/ Hot Holding (Pf, C) (x) Temperature Measuring Devices. 1. In a mechanically refrigerated or hot food storage unit, the sensor of a temperature measuring device shall be located to measure the air temperature in the warmest part of a mechanically refrigerated unit and in the coolest part of a hot food storage unit. 2. Except as specified in paragraph 3 of this subsection, cold or hot holding equipment used for time/temperature control for safety food shall be designed to include and shall be equipped with at least one integral or permanently affixed temperature measuring device that is located to allow easy viewing of the device's temperature display. New Violation. Correct By: 11/13/2026
Official report · Item 11D ↗Correction status not recorded
Correct by
Violation recordedItem 15C ↗
Equipment cleanliness
Observed outside equipment sticky with residue. Ca:511-6-1.05(7)(a)2,3 - Equipment, Food/Nonfood-Contact Surfaces, and Utensils, food-contact surfaces of cooking equipment & nonfood-contact surfaces free of accumulations (C) 2.
Inspector’s full note
Inspection item: Nonfood-contact surfaces clean
Code 511-6-1.05(7)(a)2,3
Observed outside equipment sticky with residue. Ca:511-6-1.05(7)(a)2,3 - Equipment, Food/Nonfood-Contact Surfaces, and Utensils, food-contact surfaces of cooking equipment & nonfood-contact surfaces free of accumulations (C) 2. The food-contact surfaces of cooking equipment and pans shall be kept free of encrusted grease deposits and other soil accumulations. 3. Nonfood-contact surfaces of equipment shall be kept free of an accumulation of dust, dirt, food residue, and other debris. New Violation. Correct By: 11/15/2026
Official report · Item 15C ↗Correction status not recorded
Correct by
Correction status comes from the dated report. Later changes may not be recorded here.
Inspection history 1
Official history ↗- Latest available85/100BReport
1 available inspection report. History may be incomplete.
About this location record
This page follows facility 12978058 within Fulton County. Names and addresses remain as recorded at each inspection. Different official facility IDs remain separate. Intervening inspections may be missing.
Recorded address: Official inspection listing ↗ ·