AC HOTEL ATLANTA PERIMETER - KITCHEN

1 finding recorded on Aug 21, 2026.

1. Violation recordedItem 15B ↗

   Warewashing facilities and test strips

   Observed dish machine, not reaching the required final rinse temperature of 180 Fahrenheit during the time of inspection CA: (y) Warewashing Machine, Data Plate Operating Specifications. A warewashing machine, if utilized, shall be provided with an easily accessible and readable data plate affixed to the machine by the manufacturer that indicates the machine's design and operating specifications including the: 1.

   Inspector’s full note

   Inspection item: Warewashing facilities: installed, maintained, used; test strips

   Code 511-6-1.05(2)(y),(z),(aa),(bb)

   Observed dish machine, not reaching the required final rinse temperature of 180 Fahrenheit during the time of inspection CA: (y) Warewashing Machine, Data Plate Operating Specifications. A warewashing machine, if utilized, shall be provided with an easily accessible and readable data plate affixed to the machine by the manufacturer that indicates the machine's design and operating specifications including the: 1. Temperatures required for washing, rinsing, and sanitizing; 2. Pressure required for the fresh water sanitizing rinse unless the machine is designed to use only a pumped sanitizing rinse; and 3. Conveyor speed for conveyor machines or cycle time for stationary rack machines. (z) Warewashing Machines, Internal Baffles. Warewashing machine wash and rinse tanks shall be equipped with baffles, curtains, or other means to minimize internal cross contamination of the solutions in wash and rinse tanks. (aa) Warewashing Machines, Temperature Measuring Devices. A warewashing machine shall be equipped with a temperature measuring device that indicates the temperature of the water: 1. In each wash and rinse tank; Pf and 2. As the water enters the hot water sanitizing final rinse manifold or in the chemical sanitizing solution tank. Pf (bb) Manual Warewashing Equipment, Heaters and Baskets. If hot water is used for sanitization in manual warewashing operations, the sanitizing compartment of the sink shall be: 1. Designed with an integral heating device that is capable of maintaining water at a temperature not less than 171ºF (77ºC); Pf and 2. Provided with a rack or basket to allow complete immersion of equipment and utensils into the hot water. Pf Advised PIC to discontinue use of dish machine until it is repaired and able to consistently reach the required final temperature. Use the three compartment sink for proper wash, rinse and sanitization until corrected. New Violation.

   Official report · Item 15B ↗

   Correction status not recorded

Correction status comes from the dated report. Later changes may not be recorded here.