North End Kitchen & Bar receives B in Fulton County health inspection

1. 01

   Cold holding

   Item 6-1A ↗

   Observed prep top coolers and 3 RIC’s in main kitchen are not maintaining the temperatures at or below 41F for several TCS foods like salmon salad,cut tomatoes,chicken,fish.PIC moved the food into walk in to cool them down to 41F 511-6-1.04(6)(f) - Time/Temperature Control for Safety; Cold Holding (P) (f) Time/Temperature Control for Safety Food, Hot and Cold Holding. Except during preparation, cooking, or cooling, or when time is used as the public health control, time/temperature control for safety food shall be maintained at 41°F (5°C) or below or 135°F (57°C) or above, except that roasts cooked to a temperature and for a time specified in subsection (5)(a)2 of this Rule and reheated…

   Inspector’s full note +

   Code 511-6-1.04(6)(f)

   Observed prep top coolers and 3 RIC’s in main kitchen are not maintaining the temperatures at or below 41F for several TCS foods like salmon salad,cut tomatoes,chicken,fish.PIC moved the food into walk in to cool them down to 41F 511-6-1.04(6)(f) - Time/Temperature Control for Safety; Cold Holding (P) (f) Time/Temperature Control for Safety Food, Hot and Cold Holding. Except during preparation, cooking, or cooling, or when time is used as the public health control, time/temperature control for safety food shall be maintained at 41°F (5°C) or below or 135°F (57°C) or above, except that roasts cooked to a temperature and for a time specified in subsection (5)(a)2 of this Rule and reheated using the same temperature and time conditions as cooking may be held at a temperature of 130°F (54°C) or above. P Corrected On-Site. New Violation.

   Official report · Item 6-1A ↗
   Corrected on siteNew violation
2. 02

   Utensil storage

   Item 14A ↗

   Observed scoops stored inside the dry storage containers with handles touching the food. PIC removed the scoops to place them away from food.

   Inspector’s full note +

   Code 511-6-1.04(4)(k)

   Observed scoops stored inside the dry storage containers with handles touching the food. PIC removed the scoops to place them away from food. 511-6-1.04(4)(k) - In-Use Utensils, Between-Use Storage (C) (k)Storage of In-Use Utensils. During pauses in food preparation or dispensing, food preparation and dispensing utensils shall be stored: 1.Except as specified under paragraph 2 of this subsection, in the food with their handles above the top of the food and the container; 2.In food that is not time/temperature control for safety food with their handles above the top of the food within containers or equipment that can be closed, such as bins of sugar, flour, or cinnamon; 3.On a clean portion of the food preparation table or cooking equipment only if the in-use utensil and the food-contact surface of the food preparation table or cooking equipment are cleaned and sanitized at a frequency specified under DPH Rule 511-6-1-.05(7)(b) and (8)(a); 4.In running water of sufficient velocity to flush particulates to the drain, if used with moist food such as ice cream or mashed potatoes; 5. In a clean, protected location if the utensils, such as ice scoops, are used only with a food that is not time/temperature control for safety food; or 6. In a container of water if the water is maintained at a temperature of at least 135°F (57°C) and the container is cleaned at a frequency specified under DPH Rule 511-6-1-.05(7)(b)3(vi). Corrected On-Site. Repeat Violation.

   Official report · Item 14A ↗
   Corrected on siteRepeat violation
3. 03

   Warewashing facilities and test strips

   Item 15B ↗

   At the time of inspection, PIC failed to provide appropriate test strips to test sani concentration in 3comp sink. PIC advised to order the test strips ASAP.

   Inspector’s full note +

   Code 511-6-1.05(3)(h),(i),(j)

   At the time of inspection, PIC failed to provide appropriate test strips to test sani concentration in 3comp sink. PIC advised to order the test strips ASAP. 511-6-1.05(3)(h),(i),(j) - Temperature Measuring Device, Manual Warewashing; Sanitizing Solutions, Testing Device (Pf) (h) Temperature Measuring Devices, Manual and Mechanical Warewashing. 1. In manual warewashing operations, a temperature measuring device shall be provided and readily accessible for frequently measuring the washing and sanitizing temperatures. Pf 2. In hot water mechanical warewashing operations, an irreversible registering temperature indicator shall be provided and readily accessible for measuring the utensil surface temperature. Pf (i) Sanitizing Solutions, Testing Devices. A test kit or other device that accurately measures the concentration in mg/L of sanitizing solutions shall be provided. Pf j) Cleaning Agents and Sanitizers. 1. Cleaning agents that are used to clean equipment and utensils as specified under section (7) of this Rule, shall be provided and available for use during all hours of operation. Pf 2. Except for those that are generated on-site at the time of use, chemical sanitizers that are used to sanitize equipment and utensils, as specified under Section (8) of this Rule, shall be provided and available for use during all hours of operation. Pf New Violation. Correct By: 09/07/2026

   Official report · Item 15B ↗
   New violation

   Correct by
   Sep 7, 2026

Correction and repeat labels quote the report. An absent label leaves correction status unknown; a deadline does not confirm a correction.